Assembling the Taurom is not that difficult but still requires some time and insight. You can compare it to building a cabinet. The Taurom can be assembled in a simple way. All materials are prepared in advance so that during the session we are only concerned with assembling the parts. A detailed step-by-step plan helps us do this.
There are 3 stages in this process:
-placing the drumhead
-tensioning of the batter
-assembling the rasp and leather handle
TOOLS
Rivet pliers
Universal pliers
Hammer
Tensioner and lighter
Tape measure and scissors
NECESSARY MATERIALS
PVC Taurombody of 25 cm height with diameter of 11/12.5 cm provided with 16 basting holes + fixing holes for sleeve tube (4) and leather strap (2)
Leather belt, 8 alu tubes and sleeve tube
2 cable ties
4.80 m of 2 mm nylon cord
PVC tarpaulin with 8 grommets and polyester thread
Rivet, bolt and wing nut
INFO + PHASED PLAN
TAUROM IN GENERAL
1. Introduction construction instrument
2. Materials and tools
3. Music technique
